Raycap Industrial Surge Protection RFQ

IMPORTANT:

Please follow the provided guidelines while completing and submitting the RFQ form.

To prevent potential submission errors, always utilize the “Paste as Plain Text” option when transferring customers’ information to the form.

Avoid inserting any links, whether from email signatures or other sources, into the form. Doing so can lead to the form blocking the submission and causing errors.

Sales Rep RFQ

"*" indicates required fields

Hidden

Stage

Opportunity Owner*

Intended Fabricator?

Raycap Charleston

Raycap Kearny

Raycap Post Falls

If we're outsourcing material, what suppliers do we need a quote from?

Customer Contact Name*

First Name* Last Name*

Customer Contact Email*

Company Name*

Is this customer already in Salesforce?*

Yes

Company Address*

Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country

Customer Phone Number*

Customer Email*

Site City

Site State

Please give state (two-letter abbreviation).

Hidden

New Project Name (Site Name)*

Carrier*

Hidden

Carrier – OLD

Customer Site Number

Please leave blank if none.

Division*

“Division” was established for reporting purposes only. Select SCP for all InvisiWave projects (unless we’re optioning InvisiWave see below) even though panel-based projects will still be quoted/managed by the Legacy team. *Any small cell project (even panel-based) with quantities greater than one with multiple physical addresses fall under the SCP division simply due to volume. All small cell rooftop projects and pods are considered Legacy unless they are InvisiWave or have multiple addresses. Optioned InvisiWave rooftops/pods projects will be Legacy.

Legacy (Macros)

SCP (Small Cell Poles)

Select the items you currently need for this project:*

Proposal

Concept

Project Type*

Sub-Category (Bulk)*

Sub-Category (Custom Rooftop)*

Sub-Category (DAS)*

Sub-Category (Engineering Only)*

Sub-Category (Engineering Only DAS)*

Sub-Category (Pole Products)*

If the scope requires a radome expansion and we’re NOT supplying the steel, please select “Radome Replacement”.

What pole finish is required?

Painted

Galv Only

Option Paint

Sub-Category (Misc/Other)*

Sub-Category (Engineering Only Small Cell)*

Sub-Category (Small Cell)*

Sub-Category (Small Cell Poles)*

Please select material type:*

Steel

Aluminum

Sub-Category (Special/Tree/Branches)*

Fully, Partially, or Non Concealed?*

New or Retrofit?*

Fastlane Candidate?*

Only select this option if this project is identical to another project already quoted and we’re only changing the quantity and/or adding products with established part numbers and pricing. Do not use this if the design is different.

Yes

If yes, please provide the job number if scenario "B" is the case in the question above, otherwise leave blank.*

What Standard Option is it close to?*

What is the overall height?*

Equipment Inside or Outside pole?*

Pics or Dwgs of poles that we are to resemble?*

If yes, please upload below

Yes

Light Arms required?*

Yes

What is the finish of the pole?*

Type of Foundation Required?*

What Raycap part number is this close to?*

Numerical Value Only

What type of retrofit?*

What material is the existing pole?*

Height of existing pole?*

Numerical Value Only

Do we have dwgs of existing pole?*

If yes, please upload below

Yes

Transitions Required?*

Yes

Are we providing Structural Analysis of existing pole?*

Yes

Will this project require InvisiWave materials?*

Is ventilation required?

Yes

Is overhead power required?

Yes

Qty of 4G Operators*

Qty of 5G Operators*

Do we have specs on all equipment?*

5G Radio, 4G Antenna(s), 4G Radios, RRH/RRU’s, Rectifier, Fiber Box, Meter Socket, Disconnect, etc.

Yes

Choose yes if this small cell project has multiple quantities that will deliver to multiple physical addresses.*

Please indicate the target cost for this project.*

Please indicate the target lead time for this project.*

Will the FRP and/or panels need to be pre-cut?*

Yes

Will the panels need to have paint/texture?*

Yes

What type of steel is Raycap to supply for this project?*

Check all that apply.

Dunnage

Ballast Framing

Base Plates

Antenna Mounting Pipes

New Bulkhead

None

Other

What type of steel should we supply for this project?*

Check all that apply. If “radome only” is your selected sub-category, please choose “none” below.

Mast/Spine

Bulkheads

Ballast Framing

None

What accessory items should be included?*

Check all that apply.

Disconnect

Shroud/Cage

Light/Arm

Topper

Beards

Masks

Fiberbox

None

Include light/arm spec/part number below.*

If other, please explain.*

Is the proposed pole round or square?*

Round

Square

If fall zone is required, please list fall zone requirements here:*

Is this to be designed as extendable?*

Yes

What is the overall height WITHOUT the extension?*

What is the overall height WITH the extension?*

Overall Height*

Please note: Provide height to the top of the branches, not top of steel.

Total Number of Carriers*

Tower Specifications*

Please check all options below that apply to the tower we are quoting.

Cross Bracing

Round Legs

Square Legs

Includes Bell(s)

Includes Cross(es)

Includes Decal(s)

None Of The Above

Branches Per Foot Requirement (ex. 2.1, 2.6, 3.0, etc.)*

Painted or Barked Pole*

Branch Start Height*

What type of steel is STEALTH to supply for this project?*

Check all that apply.

Dunnage

Ballast Framing

Bulkheads

Base Plates

Antenna Mounting Pipes

Mast/Spine

Entire Tower

None

What type of steel is STEALTH to supply for this project?*

Check all that apply.

Dunnage

Ballast Framing

Bulkheads

Base Plates

Antenna Mounting Pipes

Mast/Spine

None

What volume are we quoting? If multiple quantities (25, 50, 100, etc.) are needed, please enter lowest qty here and describe additional quote qty needed in the scope of work section below.*

Please enter a numeric value only.

If multiple designs apply, how many of each design are we quoting?*

Please enter a numeric value only.

What quantity are we quoting?*

Please enter a numeric value only.

Radome Type*

If we are quoting radomes, which radome style does the customer prefer? Please describe in the comments below whether your radomes have ventilation or perforation requirements.

Hidden

Radome Type – OLD

If we are quoting radomes, which radome style does the customer prefer? Please describe in the comments below whether your radomes have ventilation or perforation requirements.

Filament Wound

InvisiWave®️

Molded Fiberglass

Multi-part Multi-sided

Multi-part Smooth

One Part Smooth

Radius ESSV

RadomeEvo

RadomeFlex™

Should we include engineering?*

Full PE-Stamped Drawings & Calcs

Stamped Panel Attachment Letter (PAL)

Thermal Analysis

Fabrication Drawings

No, Engineering is not included

Other Steel

Will this project require any special LARR/FFX/DSA/San Diego/Clark County requirements?*

Yes

Please check the texture that applies to this project.*

Will this product require a Raycap disconnect?*

Yes

Does this project have a STEALTH job number (from sims, samples, etc)? If so, please supply the job number(s) or site name.*

Are there any variances between CD’s and SOW?*

Yes

Previous Project Similarity?*

Yes

If Yes, list project #*

ONLY if the customer provides a date, please provide the date for this quote to be in the customer's hands.

File Upload:

Please attach all CD’s, equipment specs, photos, etc. to in this field. If your attachments are more than 20MB, please email them to the appropriate SCP or Legacy email (based on what type of project you’re requesting).

Drop files here or

Max. file size: 20 MB.

Please summarize our scope of work as discussed with the customer and paste any email/verbal correspondence with the customer here.*

Please list any competitors we're bidding against:*

Please identify any buying criteria (cost, quality, lead time, etc.)*

Who are the decision makers?*

CAPTCHA

Cookie	Duration	Description
cookielawinfo-checbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

IMPORTANT:

Please follow the provided guidelines while completing and submitting the RFQ form.

Sales Rep RFQ

Cookie Disclaimer