Finally, an SPD you don’t have to replace

Strikesorb 30 Surge Protective Devices

Strikesorb 30 SPDs protect mission-critical applications from successive overvoltage events. Strikesorb 30 modules are Class I and Class II SPD per IEC 61643-11, and capable of absorbing and dissipating the energy of multiple electrical surges without degradation to the module.

Strikesorb 30 surge protective devices protect a large variety of applications from successive overvoltage events.

Only Raycap’s Strikesorb Surge Protective Device (SPD) technology can provide uninterrupted protection from damaging overvoltage and surge events. Strikesorb 30 modules are designed to absorb and dissipate the excess energy of successive power surges without performance deterioration.

  • Innovative design: direct connection, no fuses, environmentally-sealed SPD
  • Fully recognized to UL 1449 4th edition
  • Compliance to IEC 61643-11
  • Nominal Discharge Current per UL 1449 4th edition and IEC 61643-11, 20kA
  • Maximum Surge Current (8/20µs) per NEMA LS-1, 60kA
  • Available in a variety of operating voltages

Strikesorb Features & Benefits

  • Maintenance-free
  • High short circuit current rating
  • Low let-through voltage, optimum protection level
  • Safeguards critical equipment integrity
  • Easy to install, requires no additional fuses
  • Integrates into most applications
  • Long life cycle, can take thousands of surges without failure or aging
  • Won’t burn, smoke, explode
  • 10 year warranty
  • Strong quality controls during manufacturing
  • 100% of Strikesorb modules are thoroughly electrically tested prior to leaving the factory, and each is assigned a unique serial number for traceability
  • Extends the lifetime of customer’s electrical systems
  • Backed by third party independent reputable test laboratories

Nominal operating AC voltages   

  • 120V
  • 240V
  • 277V
  • 480V (400V per IEC 61643-11)

Strikesorb 30 Datasheet