ACDisconnect RSCAC-9550

AC Disconnect with Integrated Surge Protectionfor Small Cell Radio Heads

Suitable for Use as Service Equipment (SUSE) without condition




  • 60A main breaker Suitable for Use as Service Equipment (SUSE) without condition per UL and NEC, 22kA Fault Current Rating (kAIC).  Can be configured with 42kAIC main breaker
  • Ships with six tandem pre-installed load breakers providing (12) 120VAC circuits which can be bridged to provide 240V
  • 120/240VAC split-phase configuration or 2 of 3 phases in a 208/120VAC 3-phase configuration
  • Employs the Strikesorb 30-A-2CHV Surge Protective Device (SPD)
    • The Strikesorb 30-A-2CHV is a Class I SPD, certified by VDE per the IEC 61643-11standard as suitable for installation in areas where induced lightning exposureis expected
    • Strikesorb 30-A-2CHV is able to withstand direct surge currents up to5kA (10/350 μs) and induced surge currents of up to 60kA (8/20)
    • Provides low let through / clamping voltage -as it does not employ spark gaps orother switching elements
    • Strikesorb offers unique protection levels for wireless and small cellapplications
  • Comes with two compression fittings that can be replaced with 1.5″ NPT conduit fittings
  • Provided Line1-to-Neutral and Line2-to-Neutral protection for 120/240VAC split-phase systems.  Can also protect Ph1-to-Neutral and Ph2-to-Neutral (2 out of 3 phases) for 208/120VAC 3-Phase systems
  • Compatible with duplex/double pole breakers
  • Patent pending design
  • Pole mount bracket facilitates mounting up to 4″ diameter pole using existing clamps.
  • Can also be banded to any diameter pole. Center mount holes (5/8″) for center pole mount


  • Offers unique maintenance free protection
  • NEMA 4X or IP 68 & NEMA 6/6P rated enclosure, allowing for installation in harsh environments
  • Lightweight design allows easy installation
  • Up to twelve (12) circuits for individual power control and over current protection of up to twelve (12) small cell radio heads
RSCAC-9550 Datasheet